Metals
C Stud - Metal Profiles
C Studs are the vertical framings used for Partition and Liner Systems with a friction fit between bottom and top tracks. The C Studs have exceptional coatings that prevent it from gradually rusting overtime. They are very easy to install and can be tailored in accordance to a project’s requirements. They are specially designed to accept for one layer and multi–layer Gypsum Plasterboards. C Studs are available in a wide range of lengths and thicknesses which is dependent on the requirement of the build for strength, height, impact resistance and sound insulation. Metal stud walls are quick to install whilst also offering an exceptional level of fire resistance.
| Material | Thickness | Flange | Width | Length |
| Galvanized Steel | 0.50mm, 0.55mm, 0.60mm, 0.70mm, 0.80mm, 0.90mm, 1.0mm, 1.10mm, 1.20mm and 1.50mm | 33.5mm and 35.5mm | 50mm, 64mm, 70mm, 76mm, 92mm, 100mm, 125mm and 150mm | 3000mm to 12000mm |
CH Stud - Metal Profiles
CH Studs are specially designed for Shaftwall Systems, whereby access is only via one side, such as those commonly found in lift shafts, stairways and garbage shoots. The CH Studs are designed to provide friction-fit contact for 25 mm Core Board as shaft liner. CH Studs normally space at every 600 mm to suit the width of the Core Board panel. CH Studs are available in a wide range of lengths and thicknesses which is dependent on the requirement of the build for strength, height, impact resistance and sound insulation.
| Material | Thickness | Flange | Width | Length |
| Galvanized Steel | 0.55mm, 0.60mm, 0.70mm, 0.80mm, 0.90mm, 1.0mm, 1.10mm, 1.20mm, 1.30mm and 1.50mm | 35mm and 38mm | 64mm, 100mm and 150mm | 3000mm to 12000mm |
E Stud - Metal Profiles
E Studs are extremely light in weight and are used for starter studs, intersections, door openings and end studs. A 25 mm gaps between the flange allows friction- fit contact for the 25 mm Core Board as shaft liner. E Studs are available in a wide range of lengths and thicknesses which is dependent on the requirement of the build for strength, height, impact resistance and sound insulation.
| Material | Thickness | Flange | Width | Length |
| Galvanized Steel | 0.55mm, 0.60mm, 0.70mm, 0.80mm, 0.90mm, 1.0mm, 1.10mm, 1.20mm, 1.30mm and 1.50mm | 25mm and 19mm | 64mm, 100mm and 150mm | 3000mm to 12000mm |
Flat Strap - Metal Profiles
Flat Strap is the horizontal member of the Ceiling / partition metal framework. Applicable for Ceiling, Partition & Liner System.
| Material | Thickness | Steel Grade | Width | Length |
| Galvanized Steel | 0.55mm, 90mm and 150mm | G300 | 0.55mm and 0.80mm | 3000mm |
Furring Channel - Metal Profiles
Furring Channel is the secondary member for ceiling metal framework. Cold roll formed from zinc coated steel strip. Applicable for Conventional Ceiling and Cinema Systems.
| Material | Thickness | Coating | Width | Length |
| Galvanized Steel | 0.50mm, 0.55mm, 0.60mm, 0.80mm, 0.90mm, 1.0mm and 1.20mm | Z275 Zinc coating / Z180 Zinc coating / Z120 Zinc coating | 64mm x 35mm x 23mm | 3000mm |
J Track - Metal Profiles
J TRACK section provides a friction for the CH and E stud, which not only holds the CH studs in position until the lining board is fitted, but also helps in aligning the boards. Components for Shaftwall CH, E stud and J track products are roll-formed from hot-dipped galvanized steel (corrosion resistant) and are available in a variety of sizes and thicknesses.
| Material | Thickness | Flange | Width | Length |
| Galvanized Steel | 0.55mm, 0.60mm, 0.70mm, 0.80mm, 0.90mm, 1.0mm, 1.10mm, 1.20mm, 1.30mm and 1.50mm | 25mm and 57mm | 66mm, 102mm, and 152mm | 3000mm |
Head Deflection J Track - Metal Profiles
HEAD DEFLECTION J TRACK section provides a friction for the CH and E stud, which not only holds the CH studs in position until the lining board is fitted, but also helps in aligning the boards. Components for Shaftwall CH, E stud and J track products are roll-formed from hot-dipped galvanized steel (corrosion resistant) and are available in a variety of sizes and thicknesses.
| Material | Thickness | Flange | Width | Length |
| Galvanized Steel | 0.55mm, 0.60mm, 0.70mm, 0.80mm, 0.90mm, 1.0mm, 1.10mm, 1.20mm, 1.30mm and 1.50mm | 50mm and 75mm | 66mm, 102mm and 152mm | 3000mm |
L Angle - Metal Profiles
Wall Angle is the perimeter member for ceiling metal framework. Cold roll formed from zinc coated steel strip. Applicable for Conventional Ceiling Systems
| Material | Thickness | Coating | Width | Length |
| Galvanized Steel | 0.50mm, 0.55mm, 0.60mm, 0.70mm, 0.80mm and 0.90mm | Z275 Zinc coating / Z180 Zinc coating / Z120 Zinc coating | 25mm x 25mm, 25mm x 50mm, 35mm x 35mm, 50mm x 50mm | 3000mm |
Main Channel - Metal Profiles
Main Channel is the primary member for ceiling metal framework. Cold roll formed from zinc coated steel strip. Applicable for Conventional Ceiling and Cinema Systems.
| Material | Thickness | Coating | Width | Length |
| Galvanized Steel | 0.50mm, 0.55mm, 0.60mm, 0.70mm, 0.80mm, 0.90mm, 1.0mm, 1.20mm and 1.50mm | Z275 Zinc coating | 38mm x 12mm x 12mm, 45mm x 12mm x 12mm, 60mm x 12mm x 12mm | 3000mm |
U Track - Metal Profiles
U TRACK section provides a friction for the stud, which not only holds the studs in position until the lining board is fitted, but also helps in aligning the boards. Components for drywall stud and track products are roll-formed from hot-dipped galvanized steel (corrosion resistant) and are available in an variety of sizes and thicknesses.
| Material | Thickness | Flange | Width | Length |
| Galvanized Steel | 0.55mm, 0.60mm, 0.70mm, 0.80mm, 0.90mm, 1.0mm, 1.10mm, 1.20mm, 1.30mm and 1.50mm | 32mm | 52mm, 66mm, 72mm, 78mm, 94mm, 102mm, 127mm and 152mm | 3000mm |
ULTRA HD U Track - Metal Profiles
ULTRA HEAD DEFLECTION U TRACK section provides a friction for the stud, which not only holds the studs in position until the lining board is fitted, but also helps in aligning the boards. Components for drywall stud and track products are roll-formed from hot-dipped galvanized steel (corrosion resistant) and are available in a variety of sizes and thicknesses.
| Material | Thickness | Flange | Width | Length |
| Galvanized Steel | 0.55mm, 0.60mm, 0.70mm, 0.80mm, 0.90mm, 1.0mm, 1.10mm, 1.20mm, 1.30mm and 1.50mm | 70mm | 52mm, 66mm, 72mm, 78mm, 94mm, 102mm, 127mm and 152mm | 3000mm |
Head Deflection U Track - Metal Profiles
HEAD DEFLECTION U TRACK section provides a friction for the stud, which not only holds the studs in position until the lining board is fitted, but also helps in aligning the boards. Components for drywall stud and track products are roll-formed from hot-dipped galvanized steel (corrosion resistant) and are available in a variety of sizes and thicknesses.
| Material | Thickness | Flange | Width | Length |
| Galvanized Steel | 0.55mm, 0.60mm, 0.70mm, 0.80mm, 0.90mm, 1.0mm, 1.10mm, 1.20mm, 1.30mm and 1.50mm | 50mm | 52mm, 66mm, 72mm, 78mm, 94mm, 102mm, 127mm and 152mm | 3000mm |