Specialty Coatings
PRODECOAT - 0770
WATERPROOFING COATING FOR EXTERIOR WALLS
PRODECOAT – 0770 is an environment friendly, green ‘Protective cum Decorative’ coating for exterior walls. It protects the structure from leakage & seepage during rain& enhances its aesthetics.
During application, PRODECOAT – 0770 travels through the surface into all cavities & hairline cracks forming polymer crystals. On solidification,it forms an elastomeric film.
PERFORMANCE FEATURES
- Excellent Water Repellency
- Resistance to UV Radiation
- Resistance to Algae,Mosses & Fungi
- Penetrating & Breathable
- Excellent Resistance to Pollutants & Saline Environment
- Tough & Scratch Proof
- Excellent Colour Retention
BENEFITS
- Stops Leakage & Seepage
- Prevents Formation of Algae,Mosses & FungiKeeping the Buildings in Good Condition Over a Longer Period of Time
- Adds to the Aesthetics of the Structure (Excellent Brightness & Finish)
- Protection with Beautification
| Sr.No. | PARAMETERS | CONVENTIONAL PAINT | PRODECOAT - 0770 |
| 1. | Chemical Composition | Acrylic Emulslon | Grafted Copolymer wtth Specialty Functional Additives |
| 2. | Application System | Need to mix water before application | Single pack with no mixing required |
| 3. | Application Procedure | Requires 1 Coat of Primer & 2 Coats of Acrylic Emulsion Paint |
Requires only 2 Coats without Primer |
| 4. | Performance Polymer in the System | 15% to 20% | 45% to 50% |
| 5. | Drying Time | 4 to 6 hours | 30 minutes |
| 6. | Application Surface | Can be applied only on Concrete surfaces | Applicable on all surfaces like Concrete,Metal, |
| 7. | Retention Properties | Inadequate Retention Properties Degrades with time under UV Radiation (Sunlight), Rain, Pollutants & Abrasive action |
Excellent Retention Properties No effect of UV Radiation, Rain, Pollutants, Chemlcals & Abrasive action |
SURFACOOL - 0712
HEAT INSULATION COATING
SURFACOOL – 0712 reduces transfer of heat from outdoors to indoors and keeps residential spaces, public spaces & work places cool in summer.
An advanced polymer based research product, SURFACOOL- 0712, substantlally reduces energy consumption and cost of coollng by reducing the heat load.
PERFORMANCE FEATURES
- Excellent Heat Insulation Properties – Temperature Gradient of 10°C to 14°C in Peak Summer
- Resistance to Corrosion & JV Radiation – Sustained Outdoor Stability
- Impermeability to Water Vapour
- Long Lasting Waterproofing Effect
- High Elongation – Absorbs Expansion & Contraction of Substrates
- Anti-Static with Resistance to Algae & Fungi
BENEFITS
- Saves Energy by Reducing Heat Load (Direct Energy Saving Up to 30% in Peak Summer)
- Makes Structure Water Tight- No Leakage during Rain from Concrete & Metallic Roofs I Walls
- Protects Metallic Roofs from Corrosion and Enhances Life (Reduces Thermal Expansion & Contraction)
- Enhances Aesthetics (No Fungus & Moss Formation)
- Cost Effective Fire Resistant
- Enhanced Efficiency of People & Machinery
- ‘Self to Do’ Application
| Sr.No. | PARAMETERS | CONVENTIONAL PAINT | SURFACOOL - 0712 |
| 1. | Chemical Composition | Acrylic Emulsion based Resin with Ceramic Hollow Spheres | Zero VOC Grafted Copolymer with Specialty Functional Additives |
| 2. | Application System | Two Pack System- Requires mixing of Paint & Powder | Single Pack with no mixing required |
| 3. | Primer Application | Needs application of Primer | Self Priming - Primer application not required |
| 4. | Film Thickness | 300 to 1000 microns | 100 microns |
| 5. | Drying Time | 4 to 6 Hours | 30 minutes |
| 6. | Application Surfaces | Can be applied only on Concrete surfaces, not on Metal,Tiles or FRP | Applicable on all surfaces like Concrete ,Metal, Tiles, FRP, Wood & Plastic |
| 7. | Retention Properties | Inadequate Retention Properties Degrades with time under UV Radiation (Sunlight), Rain, Pollutants & Abrasive action | Excellent Retention Properties No effect of UV Radiation, Rain, Pollutants, Chemicals & Abrasive action |
| 8. | Temperature Gradient | 5°C to 6°C | 10°C to 14°C |
| 9. | Resistance to Fire | Moderate | Excellent |
| 10. | Maintenance | Difficult to maintain - Not washable Oil stains cannot be removed | Zero maintenance. Easy to clean & wash. Oil stains can be easily removed |
POLYSEAL - 0724
WATERPROOF COATING
POLYSEAL – 0724 is a unique green coating formulation for effectively arresting leakage & seepage from wet areas. During application POLYSEAL – 0724 travels through the surface into all cavities & hairline cracks forming polymer crystals on solidification.These crystals seal every possible flow of water & make the entire surface waterproof.
PERFORMANCE FEATURES
- Excellent Water Repellency & Impermeability to Moisture
- Tough& Abrasion Resistant – No Damage to Coating during Construction Activities
- Deep Penetrating – Seals Porosities & Hairline Cracks to Make the Surface Completely Watertight
- Anti-Efflorescence – Prevents Salt Migration & Water Oozing on Interior wall Surfaces
BENEFITS
- Coverage of 90-100 Sq.ft per litre (Single Coat)
- No Damage to Coating during Other Construction Activities
- Low Life Cycle Cost Compared to Conventional Waterproofing System
- Substantial Time Saving
Polymer Membrane Technology (PMT)
Polymer Membrane Technology (PMT) is an advanced form of waterproofing treatment for slabs, terraces, basement areas and retention walls of old & new structures.
PMT uses a specially designed polymer membrane which is an advanced flexible fabric having specific grain structure with high polymer absorbing characteristics. This membrane is applied between two layers of coatings and forms a tough surface which is resistant to water,offers excellent hardness,high flexibility and can withstand considerable stress. Flexibility of the membrane enables expansion & contraction while ensuring excellent adhesion with substrate.
PERFORMANCE FEATURES
- Excellent Strength & Flexibility
- Impermeability to Water & Water Vapour
- Sustained Resistance to UV Radiation
- Tough & Abrasion Resistant
- Anti-Skid
BENEFITS
- Guaranteed Performance Over Prolonged Life Cycle
- No Restriction on usage of Surface Post Treatment
- Non-Destructive Process – No Damage to Structure & No Change in Original Structure
- Safe for the Structure – Post Treatment No Increase in Weight of the Structure
- Effective, Economical & Quick as Compared to Conventional Systems
CORRONIL - 0767
ANTl-CORROSION COATING
CORRONIL – 0767 is a high performance ZERO VOC, environment friendly,anti-corrosion protective coating for protecting metallic structures in varied climatic conditions.
PERFORMANCE FEATURES
- Excellent Resistance to Corrosion
- Resistance to Humidity
- Prolonged Res stance to Chemicals & Corrosive Gasses
- High Flexibility & Impact Resistance
- Excellent Adhesion to Ferrous & Non-Ferrous Substrates
- Excellent Temperature Resistance to UV Radiation
- Stable In Temperature Range of – 40°C to 200°C
BENEFITS
- Single Pack Ready-to-use System – Long Pot Life
- Self Priming – Direct to Metal Application
- Fast Curing at Room Temperature
- On-Site & .Site Application
- Easy to Repair and Recoat
- Environment Friendly – RoHS Compliant
- Enhanced Life Cycle
- Saves Time, Labour, Material, Energy – No Need of Oven Baking
- Available in All Desired Colour Shades
- Easy to clean& wash
| Sr.No. | CONVENTIONAL ANTI-CORROSION COATING SYSTEM (EPOXY/PU) | GSC ANTI-CORROSION GREEN COATING SYSTEM CORRONIL - 0767 |
| 1. | Thermosetting Polymer. | Patented Grafted Copolymer Technology |
| 2. | Two Pack system. Calls for skilled manpower to supervise weighing & mixing accuracy. | Single Pack: Ready to Use system. Performance does not depend on skill of manpower. |
| 3. |
Primer + Barrier Coat + Intermediate Coat + Topcoat |
Does not require multi-layer coating 2 to 3 coats of Topcoat |
| 4. | Shorter pot life - to be used within specific time after mixing two components. | Longer pot life - can be used up to six months after opening tin. |
| 5. | Long Curing I Drying time. | Dries quickly at room temperature (within 30 minutes without oven) |
| 6. | Requires oven baking to accelerate drying time. Consumes high energy. | Needs no energy. Green technology leads to claiming of Carbon Credits. |
| 7. | Hazardous & Not RoHS Compliant. | Non-Hazardous, Zero VOC, RoHS Compliant. |
| 8. | Overall Complicated Application Process Longer Coating Duration Close & Skilled Supervision Required Environmentally Hazardous |
Overall Simple Application Process Quick & Convenient Coating Operation Saves Time, Labour, Energy & Cost Green, Environment Friendly Coating |
INTERGRANDE - 0720
ANTI-BACTERIAL COATING
INTERGRANDE – 0720 is an effective, long lasting, anti-bacterial, anti- viral decorative coating that adds value to the aesthetics of surfaces while predominantly protecting them from bacteria like Staphylococcus aureus & E. coli and fungi like Aspergillus niger & Penicillium sp.
INTERGRANDE – 0720 uses patented water based Grafted Copolymer Technology – the outcome of our disruptive research.Our sharp Advanced Grafted Copolymer Molecules in the thin film polymer coating, tear open the cell wall of the micro-organisms rendering them harmless.
PERFORMANCE FEATURES
- Advanced Nano Grafted Copolymer Technology
- Non-Toxic Active Ingredients – No added Anti-Bacterial Additives
- No Leaching & Transdermal Absorption
- Excellent Water Repellency
- Retention of Surface Properties coupled with Enhanced Life Cycle Performance
- Superior Scratch Resistance Properties
- No Dirt Pick Up and Fully Washable with Water & Detergents or Cleaning Agents
BENEFITS
- Unique Value Proposition – Hygiene with Aesthetics
- Superior Long Lasting Finish- Available in an array of finishes like Matt, Glossy, Semi-glossy and Grainy Texture
- Non Toxic, Zero VOC, Green Coating formulation
- No Odour during and after Application
| Sr.No. | PARAMETERS | CONVENTIONAL ANTI-BACTERIAL COATINGS | INTERGRANDE - 0720 |
| 1. | Chemical Composition | Silver ion technology | Advanced Grafted Copolymer Technology with no toxic additives |
| 2. | Durability | Depot effect | Prolonged performance due to superior surface properties of Polymer coating |
| 3. | Efficacy | Performance diminishes with time | Functions on non- migratory concept, as migratory antibacterial additives resulting in sustained performance get exhausted Independent of time,due to the unique surface properties,that control growth of bacteria & micro-organisms |
| 4. | Compatibility | Not compatible with all Substrates | Compatible with all Substrates like Concrete, Metal, Wood, Glass, Fibre & Plastic |
GALVART - 0723
ROOM TEMPERATURE GALVANIZING COATING
GALVART – 0723 a room temperature Galvanizing Coating is a water based,breakthrough innovation that is a high performance substitute for the conventional Hot Dip Galvanizing Process. It is used to protect diverse substrates like carbon Steel, Stainless Steel, Non-Ferrous Metals and Alloys. It reinforces the surfaces and extends their longevity. GALVART – 0723 is an Environment friendly, Zero VOC, Odourless, Non-Toxic, RoHS compliant coating.
PERFORMANCE FEATURES
- Excellent Resistance to Corrosion in the most Aggressive Conditions
- Long Term Resistance to Corrosive Chemicals
- Sustained Resistance to Ultra-Violet Radiation
- Resistance against Aging & Weathering
- Impermeability to Moisture & Oxygen
- Excellent Creep Resistance
- Robust Outdoor Stability
BENEFITS
- Easy Application Process
- Quick Drying at Ambient Temperature – Fast Curing
- Self-Priming – No Need to Apply Primer
- Easy to Touch-up and Recoat
- Application with Conventional Tools like Spray & Roller
- Convenient for Off-Site & On-Site Application
- Enhanced Corrosion Protection even when Applied on Existing Galvanized Structures
- Cost effective compared to Hot Dip Galvanization Process
- Energy Saving,Eco-friendly & Compliant with HSE Standards
| Sr.No. | PARAMETERS | CONVENTIONAL PROCESS (HOT DIP GALVANIZING) | GALVART - 0723 |
| 1. | Application Process |
Dipping Component in Molten Zinc at 450°C and Above |
Application of Cold Galvanizing Coating at Room Temperature with Spray, Brush or Roller |
| 2. | Surface Preparation | Needs Complex Surface Preparation to get the Desired Results | Easy Surface Preparation |
| 3. | Suitability of Process | Difficult to Galvanize very Large or Small components due to Limitations of Dipping Process | No Limitation of Size & Profile of Components All Components can be Coated with GALVART - 0723 |
| 4. | Criticality of Process | Performance Depends on Process Controls Improper Process Control Leads to Peel-Off Needs Skilled Workforce to achieve the Desired Results |
Ready to use Coating System Does not require Skilled Manpower Simple Parameters to ensure Optimum Performance |
| 5. | Convenience | Need to Transport Components to Galvanizing Facility and then to Site Possibility of Damage during Transport No Control on Delivery & Quality On-Site Application, not Possible | On-Site & Off-Site Application Saves Time & Cost Complete control on Delivery Schedules & Quality |
| 6. | Rectification & Touch-up | Difficult to Touch-up the Damaged Area | Allows for Smooth Touch-up (No evidence of Patches) Possible to Overcoat on Existing Coating |
| 7. |
|
Presence of Lead Metal in the Process can lead to Environmental Damage Toxic Fumes are emitted during |
Water Based Green Coating RoHS compliant Safe for environment - Zero VOC Sustainable Formulation |
| 8. | Additional Features | N/A | Offers Excellent Resistance to Fire |
| 9. | Finish & Performance | N/A | Same as Hot Dip Galvanization Process |